Understanding basic command ZTE

Understanding basic command ZTE

1. gemport
   This command configures a GEM port connection that is correlated with the flow and 802.1p priority, configures ONU GEM port upstream priority queue mapping, downstream queues and UNI, and configures ONU GEM port rate limiting.

   Syntax
   gemport number 1 [{traffic-limit [downstream name 1 ] [upstream name 2 ] |{[flow number 2 ] [do t1p-list name 3 ] } | {[up-queue-map name4 ] [down-queue number3 [uni name 5 ] ] } | loop name 6} ]

   If you want to remove
   no gemport number1 [traffic-limit {downstream |upstream |all } ]

2. tcont profile
   This command creates a GPON bandwidth property profile.

   Syntax
   profile tcont name 1 type {1 fixed number 1 |2 assured number 2 |3 assured number 3 maximum number4 |4 maximum number 5 |5 fixed number 6 assured number 7 maximum number 8 }

   If needed to remove:
   no profile tcont name 1

3. vport
   This command creates an ONU vport.

   Syntax
   vport number1 mac hexadecimal1

   If needed to remove:
   no vport number

4. switchport default vlan
   This command adds a hybrid port to the default VLAN and modifies the port PVID. If the VLAN does not exist, it will be created.

   Syntax
   switchport default vlan WORD1 [name1 ]

   If needed to remove:
   no switchport default vlan
   

5. switchport mode
   This command configures the VLAN port link mode for a port. For an uplink port, the default is hybrid.

   Syntax
   switchport mode name1

6. switchport tpid
   This command configures the port TPID property.

   Syntax
   switchport tpid {{hexadecimal1 |vlan |port } ||}