Configuring a System User

Configuring a System User

Configuring a System User, for logging in to, configuring, and managing the MA5600T/MA5603T/MA5608T, system users of different attributes need to be added. This topic describes how to add a system user and modify the user attributes.

Adding a System User
This topic describes how to add system users of different attributes for logging in to, configuring, and managing the MA5600T/MA5603T/MA5608T. This facilitates the management of the MA5600T/MA5603T/MA5608T.
NOTE: You must have the administrator authority or higher authority.

Example
With the administrator authority, to add a common user with the account as huawei, password as test01, user profile as the default root user profile, user level as Common User, permitted reenter number as 3, and appended information as user, do as follows:

huawei(config)#terminal user name
User Name(length<6,15>):huawei
User Password(length<6,15>):test01    //The password is not displayed on theconsole.
Confirm Password(length<6,15>):test01  //The password is not displayed on the console.
User profile name(<=15 chars)[root]:
User’s Level:
1. Common User 2. Operator:1
Permitted Reenter Number(0–4):3
User’s Appended Info(<=30 chars):user
Adding user succeeds
Repeat this operation? (y/n)[n]:n
huawei(config)#display terminal user name huawei
—————————————————————————-
Name Level Status Reenter Profile Append
Num Info
—————————————————————————
huawei User Offline 3 root user
—————————————————————————

Step 1 Modify the system user attributes.
NOTE
Before modifying the user attributes, run the display terminal user command to query the user attributes to be modified.
– Run the terminal user password command to change the password of a user.
The password of a user consists of 6-15 characters, in which at least one digit and one letter must be contained. The password is case sensitive.
– Run the terminal user user-profile command to modify the profile bound to a user.
– Run the terminal user level command to modify the authority of a user.
– Run the terminal user reenter command to change the permitted reenter number of a user.
– Run the terminal user apdinfo command to modify the appended information about a user.

When the system has any problem, you can contact the user after querying the user appended information. It is recommended that the user appended information be modified into the information that has the actual meaning, such as the contact means and the user address.

Step 2 Check the user information.
Run the display terminal user command to query the user information.

Posted in HUAWEI OLT, GPON, OLT.

Leave a Reply

Your email address will not be published. Required fields are marked *