BLOG - IT Solution

Display sysman Display Services state on Huawei OLT : To change this: sysman ip-acess telnet 0.0.0.0 0.0.0.0 undo […]

Display ONT optical info The command bellow is to check Optical-Info for all ONT connected to OLT:

Arris C4 – Testing Arris C4 – Testing – Adding Cards. Find Arris C4 on : https://drinia.tech/product/arris-c4-fabric-control-module/ Watch […]

Key characteristics contributing to the success of the SBC FTTH network (Figure 2.1(b)) are the triple play of […]

Broadband Optical Access Technologies and FTTH Deployment in NTT The NTT access network encompasses NTT central offices and […]

Networks, Cables, OSI, and TCP Models Common Network Devices: Only a few years ago, networks were still pretty […]

ICE.NET 4G Smartrouter W1 ICE.NET 4G Smartrouter W1- is a Smartrouter that supports 4G Wireless Router Mode, Standard […]

F680 IPv6 ZTE F680 configure IPv6 as in photo bellow New connection name: ipv6 Enable Vlan ID VLAN […]

Mikrotik Sniffer Mikrotik Sniffer, Packet sniffer is a tool that can capture and analyze packets that are going […]

Backup Multiple WAN connection on Cisco Router Create IP SLA ping google to every interface that is used […]

Interface Speed Cisco Nexus 3000 Series switches have a number of fixed 10-Gigabit ports; each is equipped with […]

Cisco router IPv6 Configuration To configure IPv6 on Cisco Router it is required to have a basic information […]

Multicast Configuration Configuring Multicast using PIM-SPARSE MODE and static RP configuration. Bellow is attached the scheme that we […]

Understanding basic command ZTE gemport This command configures a GEM port connection that is correlated with the flow […]

Bridge ONTs configure on ZTE OLT This is how Bridge ONTs can be configured on ZTE OLT version […]

Huawei Traffic Tables: Creating IP Traffic Tables:traffic table ip index 1 name 60DOWN cir 61440 cbs 1968080{advised to […]

Configuring multicast on NSG 9000 6G : To configure Multicast you need to go: Applications -> Broadcast -> […]

Sagemcom Fast 5657 Sagemcom F@st 5657 is very stable GPON Device that works as third party ONT on […]

How to upgrade ONTs with OLT Command Line: remote-unit task test2 description service-type Gpon equipment-type F625G vendor-name ZTEG […]

A cable modem termination system (CMTS) is a piece of equipment, typically located in a cable company’s headend or hubsite, which is used to […]